First, you need to mark where the track will be installed with a pencil.  

• If you are wall mounting (i.e. face fitting), your marking should correspond with the drop measurement you specified in your order. So, to make sure your marking is in the right place you can use a measuring tape to measure your drop from the floor.
• If you are ceiling mounting, mark where on the ceiling you would like your track to be mounted, ensuring this is a minimum of 50mm from the wall.

Mark a few places along the wall/ceiling to make it easier to line up your curtain track correctly.

Now once you are able to place your curtain track along the markings you made, we want to mark the bracket screw points using the brackets as a template. It’s important to keep the curtain track level throughout this process. This is where a spirit level and a buddy will come in handy. 

To test the stability of the bracket fixings, drive the screws partway through the plaster at the marked bracket points. If there is no timber behind the plaster, you will need to install the brackets using Plastamates or the equivalent fixings.

Now that you have established your bracket fixing points, you can now hang your curtain track. Simply lift the track into position and install the screws through the brackets into the holes you have made. Once completed, please check use a spirit level to check that your track is level. You can use the elongation on the brackets to slightly adjust the track up or down if required.